Sun Coast Amateur
Radio Club Society

User Tools

Site Tools

You are here: home » links » meshcore » part1
links:meshcore:part1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
links:meshcore:part1 [2026/10/25 08:46] – va7filinks:meshcore:part1 [2026/10/25 20:34] (current) – [To Do] va7fi
Line 5: Line 5:
 <WRAP half column> <WRAP half column>
 <WRAP rightalign> <WRAP rightalign>
-**[[mpdf>|Download as PDF]]**+<wrap download>**[[mpdf>|Download as PDF]]**</wrap>
 </WRAP> </WRAP>
 </WRAP> </WRAP>
Line 11: Line 11:
 This is the first part of the guide.  [[part2 |The second part]] is about repeaters and other more advanced setups. This is the first part of the guide.  [[part2 |The second part]] is about repeaters and other more advanced setups.
 ---- ----
 +
  
 ====== Introduction ====== ====== Introduction ======
Line 31: Line 32:
 <WRAP centeralign> <WRAP centeralign>
 <WRAP half column> <WRAP half column>
-{{:links:meshcore:mqsg-0.png?0x160|}} \\ MeshCore devices used as //companion//.+{{:links:meshcore:mqsg-0.png?0x150|}} \\ MeshCore devices used as //companion//.
 </WRAP> </WRAP>
 <WRAP half column> <WRAP half column>
-{{:links:meshcore:mqsg-1.png?0x160|}} \\ A MeshCore device setup as a //repeater//.+{{:links:meshcore:mqsg-1.png?0x150|}} \\ A MeshCore device setup as a //repeater//.
 </WRAP> </WRAP>
 </WRAP> </WRAP>
  
-<pagebreak>+<WRAP pagebreak />
  
-<WRAP group> 
  
-<WRAP twothirds column> 
 ====== Companions  ====== ====== Companions  ======
-</WRAP> 
-<WRAP third column> 
-<WRAP rightalign> 
-((The [[#getting_started:_companions|Getting Started]] section used Liam Cottle's [[https://files.liamcottle.net/MeshCore/Documentation/MeshCore_Quick_Start_Guide.pdf |MeshCore Quick Start Guide]] from November 2025 (CC-BY-SA) as a starting point.  We then updated and expended his guide with regional settings used on the South West Coast of BC.)) 
-</WRAP> 
-</WRAP> 
-</WRAP> 
  
 ===== What is needed to use MeshCore? ===== ===== What is needed to use MeshCore? =====
Line 67: Line 59:
   * Alternatively, supported devices listed on [[https://meshcore.io/flasher]] can be purchased online from overseas suppliers such as [[https://aliexpress.com |AliExpress]] or [[https://www.seeedstudio.com/Wio-Tracker-L1-Pro-p-6454.html |Seeed Studio]], or in Canada from [[https://ca.robotshop.com/products/seeedstudio-wio-tracker-l1-pro-w-oled-3d-printed-casing |Robot Shop]].   * Alternatively, supported devices listed on [[https://meshcore.io/flasher]] can be purchased online from overseas suppliers such as [[https://aliexpress.com |AliExpress]] or [[https://www.seeedstudio.com/Wio-Tracker-L1-Pro-p-6454.html |Seeed Studio]], or in Canada from [[https://ca.robotshop.com/products/seeedstudio-wio-tracker-l1-pro-w-oled-3d-printed-casing |Robot Shop]].
  
-<pagebreak>+<WRAP pagebreak />
  
 ===== Flash the Firmware ===== ===== Flash the Firmware =====
Line 100: Line 92:
   * Connect the companion device to your computer via USB.   * Connect the companion device to your computer via USB.
   * Go to https://meshcore.io/flasher (using a **Chromium Browser**).   * Go to https://meshcore.io/flasher (using a **Chromium Browser**).
-  * Select your device +  * Select your device. 
-  * Select Companion Bluetooth +  * Select Companion Bluetooth. 
-  * Select Enter DFU Mode +  * Select Enter DFU Mode. 
-  * Select Erase Flash (for **brand new** devices only.) +  * Select Erase Flash (for **brand new** devices only). 
-  * Select Flash+  * Select Flash.
  
 To reload your previous config file (required only if you lost your configuration for some reason). To reload your previous config file (required only if you lost your configuration for some reason).
Line 117: Line 109:
   * "''Select All''" and click the check mark in the top right corner.   * "''Select All''" and click the check mark in the top right corner.
  
-<pagebreak>+<WRAP pagebreak /> 
  
 ===== Connect to your MeshCore Device ===== ===== Connect to your MeshCore Device =====
Line 133: Line 126:
 </WRAP> </WRAP>
 <WRAP third column> <WRAP third column>
-{{:links:meshcore:mqsg-5.png?0x400|}} \\ Tap "''MeshCore-XXXX''" which matches the name on your MeshCore device.+{{:links:meshcore:mqsg-5.png?0x400|}} \\ Tap "''MeshCore-XXXX''", which matches the name on your MeshCore device.
 </WRAP> </WRAP>
 <WRAP third column> <WRAP third column>
Line 143: Line 136:
 If you’re having trouble pairing with Bluetooth, try rebooting your phone. If you’re having trouble pairing with Bluetooth, try rebooting your phone.
  
-<pagebreak>+<WRAP pagebreak /> 
  
 <WRAP group> <WRAP group>
Line 157: Line 151:
   * [[#contact_settings |Disable Auto Add of Contacts]]   * [[#contact_settings |Disable Auto Add of Contacts]]
   * [[#position_settings |Disable GPS Mode]]   * [[#position_settings |Disable GPS Mode]]
-  * [[#advertdiscover |Send a flooded advert]]+  * [[#advertdiscover |Send a Flood Advert]]
 </WRAP> </WRAP>
 </WRAP> </WRAP>
 +
 ==== Public Info ==== ==== Public Info ====
 <WRAP group> <WRAP group>
Line 193: Line 188:
 </WRAP> </WRAP>
 </WRAP> </WRAP>
- 
  
 ==== Network Settings ==== ==== Network Settings ====
Line 210: Line 204:
 ^  1-byte          |  256  (16<sup>2</sup>)          |  64        |  <wrap alert>Avoid</wrap>  | ^  1-byte          |  256  (16<sup>2</sup>)          |  64        |  <wrap alert>Avoid</wrap>  |
 ^  2-byte          |  65536  (16<sup>4</sup>)        |  32        |  Companions                | ^  2-byte          |  65536  (16<sup>4</sup>)        |  32        |  Companions                |
-^  3-byte          |  16 millions  (16<sup>6</sup>)  |  21        |  Repeaters                 |+^  3-byte          |  16 million  (16<sup>6</sup>)   |  21        |  Repeaters                 |
  
 [[https://ridgeline.ve7kod.ca/identity |This page]] shows nodes with duplicate addresses, which can be fixed by increasing the path hash size. [[https://ridgeline.ve7kod.ca/identity |This page]] shows nodes with duplicate addresses, which can be fixed by increasing the path hash size.
Line 216: Line 210:
   * Tap the "''Default Path Hash Size''" and select "''2-byte''" for companions, or "''3-byte''" for repeaters.   * Tap the "''Default Path Hash Size''" and select "''2-byte''" for companions, or "''3-byte''" for repeaters.
   * Tap the <key>✔</key> icon in the top right corner to save the settings.   * Tap the <key>✔</key> icon in the top right corner to save the settings.
- 
  
 ==== Other Settings ==== ==== Other Settings ====
Line 229: Line 222:
 </WRAP> </WRAP>
 </WRAP> </WRAP>
-<pagebreak>+<WRAP pagebreak />
  
 === Contact Settings === === Contact Settings ===
Line 243: Line 236:
 </WRAP> </WRAP>
 </WRAP> </WRAP>
- 
  
 === Position Settings === === Position Settings ===
Line 256: Line 248:
 </WRAP> </WRAP>
 </WRAP> </WRAP>
- 
  
 ==== Extra Tools ==== ==== Extra Tools ====
Line 272: Line 263:
  
 Finally, let's tap the <key>✔</key> icon in the top right corner one last time to save the settings before exiting. Finally, let's tap the <key>✔</key> icon in the top right corner one last time to save the settings before exiting.
-<pagebreak>+<WRAP pagebreak /> 
  
 ===== Contacts ===== ===== Contacts =====
Line 283: Line 275:
 <WRAP third column> <WRAP third column>
 Four ways to share contact information: Four ways to share contact information:
-  - [[#advertdiscover |Advert / Discover]]+  - [[#advertdiscover |Advert/Discover]]
   - [[#qr_code |QR Code]]   - [[#qr_code |QR Code]]
   - [[#link_to_clipboard|Link to Clipboard]]   - [[#link_to_clipboard|Link to Clipboard]]
Line 290: Line 282:
 </WRAP> </WRAP>
  
 +==== 1. Advert/Discover ====
  
- +=== Advert ===
- +
-==== 1. Advert / Discover ====+
 <WRAP group> <WRAP group>
 <WRAP twothirds column> <WRAP twothirds column>
-=== Advert === 
 An advert is an unencrypted packet transmitted by your MeshCore node. It includes your node name, location and type, public identity key and a cryptographic signature to prevent anyone from tampering with the information as it’s sent across the mesh. An advert is an unencrypted packet transmitted by your MeshCore node. It includes your node name, location and type, public identity key and a cryptographic signature to prevent anyone from tampering with the information as it’s sent across the mesh.
  
Line 314: Line 304:
 </WRAP> </WRAP>
 </WRAP> </WRAP>
- 
  
 There was a deliberate decision made to [[https://github.com/meshcore-dev/MeshCore/issues/974 |prevent auto advert for companions]] (but not for repeaters).  As such, you should <wrap important>flood advert at least once a week</wrap> so that new users can find and add you to their contact list. There was a deliberate decision made to [[https://github.com/meshcore-dev/MeshCore/issues/974 |prevent auto advert for companions]] (but not for repeaters).  As such, you should <wrap important>flood advert at least once a week</wrap> so that new users can find and add you to their contact list.
Line 321: Line 310:
     * Tap "Advert • Flood Routed"     * Tap "Advert • Flood Routed"
  
-<pagebreak>+<WRAP pagebreak /> 
 === Discover === === Discover ===
 The easiest way to add nodes that are in your neighbourhood to your contact list is to use the map feature.  However, there are three different kinds of maps in MeshCore: The easiest way to add nodes that are in your neighbourhood to your contact list is to use the map feature.  However, there are three different kinds of maps in MeshCore:
Line 330: Line 320:
 {{:links:meshcore:contactlist04.png?200|}} \\ {{:links:meshcore:contactlist04.png?200|}} \\
 1) The map at the bottom of the main page only shows nodes in your contact list. 1) The map at the bottom of the main page only shows nodes in your contact list.
- 
 </WRAP> </WRAP>
 <WRAP third column> <WRAP third column>
Line 336: Line 325:
 {{:links:meshcore:contactlist06.png?200|}} \\ {{:links:meshcore:contactlist06.png?200|}} \\
 2) The map under "Discover Contacts" shows all the nodes that your companion has heard so far. 2) The map under "Discover Contacts" shows all the nodes that your companion has heard so far.
- 
 </WRAP> </WRAP>
 <WRAP third column> <WRAP third column>
 {{:links:meshcore:contactlist07.png?200|}} \\ {{:links:meshcore:contactlist07.png?200|}} \\
 3) The "Internet Map" shows a map of all the nodes heard by "observers" that are shared to the [[https://meshcore.io/map |Internet]]. 3) The "Internet Map" shows a map of all the nodes heard by "observers" that are shared to the [[https://meshcore.io/map |Internet]].
- 
 </WRAP> </WRAP>
 </WRAP> </WRAP>
Line 352: Line 339:
  
 The map will only show users that have not been added yet.  To add them: The map will only show users that have not been added yet.  To add them:
- 
   * Tap on a node   * Tap on a node
   * Under the node's name, tap on "''Add''"   * Under the node's name, tap on "''Add''"
Line 360: Line 346:
 The maps only show nodes that have [[#public_info |shared their Position in Advert]].  Nodes that have not shared their location will still show in the list, but you won't be able to tell where they are located.  That's why it's <wrap important>important to share your approximate location</wrap>: so others in your neighbourhood can add you to their contact list. The maps only show nodes that have [[#public_info |shared their Position in Advert]].  Nodes that have not shared their location will still show in the list, but you won't be able to tell where they are located.  That's why it's <wrap important>important to share your approximate location</wrap>: so others in your neighbourhood can add you to their contact list.
  
- +<WRAP pagebreak />
-<pagebreak> +
  
 ==== 2. QR Code ==== ==== 2. QR Code ====
-The fastest way to share your contact information with someone who's next to you is to use QR Codes.  However, don't text or email these out; for that, there's a better way...+The fastest way to share your contact information with someone next to you is to use QR Codes.  However, don't text or email these out; for that, there's a better way...
  
 === Share === === Share ===
Line 392: Line 376:
   * Point the device’s camera at the QR Code.   * Point the device’s camera at the QR Code.
   * The contact details will be automatically added to your contacts list.   * The contact details will be automatically added to your contacts list.
-  * Tap the <key>**✔**</key> to add.+  * Tap the <key>**✔**</key> icon to add.
  
 You may need to accept a permissions request for the MeshCore app to access your camera. This permission must be granted to be able to scan the QR Code. You may need to accept a permissions request for the MeshCore app to access your camera. This permission must be granted to be able to scan the QR Code.
Line 401: Line 385:
 </WRAP> </WRAP>
  
-<pagebreak>+<WRAP pagebreak />
  
 ==== 3. Link to Clipboard ==== ==== 3. Link to Clipboard ====
 The easiest way to share your contacts via email or SMS is to use a contact link. The easiest way to share your contacts via email or SMS is to use a contact link.
 +
 +=== Share ===
 <WRAP group> <WRAP group>
 <WRAP twothirds column> <WRAP twothirds column>
-=== Share === 
 To share your contact link: To share your contact link:
   * Tap on this <key>**⋮**</key> in the top right.   * Tap on this <key>**⋮**</key> in the top right.
Line 421: Line 406:
 </WRAP> </WRAP>
  
 +=== Add ===
 <WRAP group> <WRAP group>
 <WRAP twothirds column> <WRAP twothirds column>
-=== Add === 
 To add a contact link: To add a contact link:
   * Copy the contact link you were sent to your phone's clipboard.   * Copy the contact link you were sent to your phone's clipboard.
Line 429: Line 414:
   * Tap on "''Add Contact''"   * Tap on "''Add Contact''"
   * Tap on "''Import from Clipboard Link''"   * Tap on "''Import from Clipboard Link''"
-  * Tap the <key>**✔**</key> to add. +  * Tap the <key>**✔**</key> icon to add.
 </WRAP> </WRAP>
  
Line 437: Line 421:
 </WRAP> </WRAP>
 </WRAP> </WRAP>
-<pagebreak>+ 
 +<WRAP pagebreak /> 
 ==== 4. In a Channel ==== ==== 4. In a Channel ====
-We haven't discussed Channels yet so feel free to come back to this section later.  +We haven't discussed Channels yet, so feel free to come back to this section later.  
  
 === Share === === Share ===
Line 461: Line 447:
 To add a contact shared in a channel: To add a contact shared in a channel:
   * Simply tap the "''Add Contact''" button.  This will populate the name and public key in the ''Add Contact'' window.   * Simply tap the "''Add Contact''" button.  This will populate the name and public key in the ''Add Contact'' window.
-  * Tap <key>**✔**</key> to add.+  * Tap <key>**✔**</key> icon to add.
 </WRAP> </WRAP>
  
Line 469: Line 455:
 </WRAP> </WRAP>
  
-<pagebreak> +<WRAP pagebreak />
- +
- +
  
  
 ===== Public-key Cryptography ===== ===== Public-key Cryptography =====
-This section is **optional**.  It's interesting background on how MeshCore operates, but doesn't show how to do anything new. Feel free to skip it.+<WRAP center round info 80%> 
 +This section is **optional**.  It'll help you understand how channels and private messages work, but it won't show you how to do anything new. Feel free to skip it. 
 +</WRAP>
  
 There are basically two different strategies for encrypting a message: There are basically two different strategies for encrypting a message:
Line 495: Line 480:
  
 ==== MeshCore and Public-key Cryptography ==== ==== MeshCore and Public-key Cryptography ====
- 
 MeshCore uses Public Key Cryptography to: MeshCore uses Public Key Cryptography to:
   * Identify you uniquely: your public key is your unique ID.  It's listed in [[#public_info |System -> Public Info]], and it's part of the [[#qr_code |Contact Info]] that you share with others for them to add you to their contact list.  Your private key can be [[#extra_tools |exported]] for backup purposes or in case you upgrade your device and want to keep the same ID.  But <wrap alert>don't share your private key with anyone.</wrap>   * Identify you uniquely: your public key is your unique ID.  It's listed in [[#public_info |System -> Public Info]], and it's part of the [[#qr_code |Contact Info]] that you share with others for them to add you to their contact list.  Your private key can be [[#extra_tools |exported]] for backup purposes or in case you upgrade your device and want to keep the same ID.  But <wrap alert>don't share your private key with anyone.</wrap>
   * A private message is encrypted with the recipient's public key.  So even though it's transmitted over RF and everyone is receiving the message, only the recipient's private key can decrypt it.   * A private message is encrypted with the recipient's public key.  So even though it's transmitted over RF and everyone is receiving the message, only the recipient's private key can decrypt it.
-  * Different types of channels use public / private key pairs in different ways to make the channel either public or private (more on that in the next section).+  * Different types of channels use public/private key pairs in different ways to make the channel either public or private (more on that in the next section).
  
-<pagebreak>+<WRAP pagebreak />
  
-===== Direct, Private Messages ===== 
  
 +===== Direct, Private Messages =====
 To send a direct, private message to someone, <wrap important>you **both** need to be in each other's contact lists.</wrap> To send a direct, private message to someone, <wrap important>you **both** need to be in each other's contact lists.</wrap>
   * Use one of the four methods for [[#contacts |sharing contact info]].   * Use one of the four methods for [[#contacts |sharing contact info]].
Line 536: Line 520:
 </WRAP> </WRAP>
  
- +<WRAP pagebreak />
-<pagebreak> +
- +
- +
  
  
 ===== Channels ===== ===== Channels =====
-Channels are "places" for people to share messages with large groups of people.  It's not possible to know who did and did not receive messages posted in channels.  There is also no "storing" capability, so if someone's node is out of reach, they will miss these messages.+Channels are "places" for people to share messages with groups of people.  It's not possible to know who did and did not receive messages posted in channels.  There is also no "storing" capability, so if someone's node is out of reach, they will miss these messages.
  
 There are three types of channels: There are three types of channels:
Line 551: Line 531:
 ^The Public channel | has a known public/private key pair so every device can send messages to and read messages from that channel.| ^The Public channel | has a known public/private key pair so every device can send messages to and read messages from that channel.|
 ^Hashtag channels | can be created and joined by anyone.  The public/private key pair is derived from the hashtag name so anyone who knows the hashtag can join.  These are public channels based on different topics or regions.| ^Hashtag channels | can be created and joined by anyone.  The public/private key pair is derived from the hashtag name so anyone who knows the hashtag can join.  These are public channels based on different topics or regions.|
-^Private channels | have a randomly generated keys.  So only those who know the private key can join the channel.  Messages there are private in-so-far as the private key is not distributed outside the intended circle.|+^Private channels | have randomly generated keys.  So only those who know the private key can join the channel.  Messages there are private insofar as the private key is not distributed outside the intended circle.|
 </WRAP> </WRAP>
  
Line 566: Line 546:
   * Tap on "''Add Channel''"   * Tap on "''Add Channel''"
   * Tap on "''Join the Public Channel''"   * Tap on "''Join the Public Channel''"
-  * Leave the Channel Name to "''Public''" and tap "''Join Channel''"+  * Leave the Channel Name as "''Public''" and tap "''Join Channel''"
  
-<pagebreak>+<WRAP pagebreak />
  
 ==== Hashtag Channel ==== ==== Hashtag Channel ====
 Hashtag channels are public channels based on topics or regions.  Here are a few channels used in the South West region of BC: Hashtag channels are public channels based on topics or regions.  Here are a few channels used in the South West region of BC:
 <WRAP indent> <WRAP indent>
 +|<100%>|
 ^''#bc''      |Public channel for BC | ^''#bc''      |Public channel for BC |
 ^''#salishmesh'' |Public channel for the Salish area | ^''#salishmesh'' |Public channel for the Salish area |
 ^''#ssi''     |Public channel for Salt-Spring Island | ^''#ssi''     |Public channel for Salt-Spring Island |
-^''#news''    |News related items |+^''#news''    |News-related items |
 ^''#drivebc'' |A bot that posts Drive BC notifications | ^''#drivebc'' |A bot that posts Drive BC notifications |
 ^''#kod-bot'' |A bot maintained by VE7KOD for testing.  Common commands: ''test'' (or ''t''), ''Path'' (or ''p'').  [[https://agessaman.github.io/meshcore-bot/command-reference/ |Full list here.]] | ^''#kod-bot'' |A bot maintained by VE7KOD for testing.  Common commands: ''test'' (or ''t''), ''Path'' (or ''p'').  [[https://agessaman.github.io/meshcore-bot/command-reference/ |Full list here.]] |
Line 587: Line 568:
   * Type the channel name after the ''#'' symbol and tap "''Join Channel''"   * Type the channel name after the ''#'' symbol and tap "''Join Channel''"
  
 +==== Private Channel ===
 +Private channels create their key pairs randomly and independently of the channel name.  As such, a private channel can be renamed without affecting its "identity".  Here are a list of some private channels used in the South West region of BC.
  
-<pagebreak> +<WRAP indent> 
- +|<100% 11em ->| 
-====== Under Construction ====== +^''Sunshine Coast''      |Private channel for the Sunshine Coast | 
- +^''VanIsle'' |Private channel for Vancouver Island |
-<WRAP center round todo 90%> +
-I'm still editing the rest of this document.   --- //[[[email protected]|Patrick, VA7FI]] 2026/10/22 16:28//+
 </WRAP> </WRAP>
  
-If you notice typos or anything that needs to be fixed in the pages above, please [[[email protected] |email me directly]].  The rest of this document is still being reviewed and edited heavily.+There may be more that we are not aware of, and we will not list the private keys for these channels here.
  
 +To join an existing private channel:
 +  * Obtain the private key from someone in that channel.
 +  * Tap on <key>**⋮**</key> in the top right.
 +  * Tap on "''Add Channel''"
 +  * Tap on "''Join a Private Channel''"
 +  * Type the channel name, the secret key (private key), and tap "''Join Channel''"
  
-==== Private Channel ===+To create a new private channel: 
 +  * Obtain the private key from someone in that channel. 
 +  * Tap on <key>**⋮**</key> in the top right. 
 +  * Tap on "''Add Channel''" 
 +  * Tap on "''Create a Private Channel''" 
 +  * Type the channel name and copy the secret key (you can do this later). 
 + 
 +<WRAP pagebreak />
  
 ==== Notifications ==== ==== Notifications ====
 Each channel can be configured with one of three different notification levels: Each channel can be configured with one of three different notification levels:
 +<WRAP indent>
 +|<100% 11em ->|
 +^All Messages |A notification will show for all received messages.|
 +^Mentions Only |A notification will show if someone mentions you. |
 +^None |Notifications will not be shown. |
 +</WRAP>
  
 +To change a channel's default notification settings:
 +  * Tap on <key>**⋮**</key> beside the channel you want to change.
 +  * Tap on "''Notifications''"
 +  * Select the notification level you want
 +  * Tap the <key>**✔**</key> icon to save the settings.
  
-<pagebreak>+There are two ways to mention someone in a channel: 
 +  * Long-press on one of their messages. 
 +  * Tap  "''Reply''" 
 +  * Type your message after the string that's automatically added.
  
 +or
 +  * In the message window, type: "''@[TheirMeshCoreName]''" somewhere in the message (it doesn't have to be at the beginning).
 + 
 +
 +<WRAP pagebreak />
  
  
 ===== Ping a Repeater ===== ===== Ping a Repeater =====
-To check the signal strength to and from a nearby repeater, you can run a ping test.+To check the signal strength to and from a nearby repeater, you can run a ping test:
   * Tap on this <key>**⋮**</key> icon next to a repeater contact.   * Tap on this <key>**⋮**</key> icon next to a repeater contact.
-  * Tap the "Ping (Zero Hop)" menu item.+  * Tap the "''Ping (Zero Hop)''" menu item.
   * A green pop-up will show signal strengths if successful.   * A green pop-up will show signal strengths if successful.
   * A red pop-up will show "Timeout" if your companion didn’t hear the repeater.   * A red pop-up will show "Timeout" if your companion didn’t hear the repeater.
Line 630: Line 643:
 </WRAP> </WRAP>
  
-<WRAP center round info 70%> 
 Ping tests do not hop through multiple repeaters. You must be in range of the specific repeater you are ping testing. For a ping test to be successful, the repeater must hear your companion signal directly, and your companion must hear the repeater signal directly. If you’re not in range of the repeater, the ping test will fail with a timeout error. Ping tests do not hop through multiple repeaters. You must be in range of the specific repeater you are ping testing. For a ping test to be successful, the repeater must hear your companion signal directly, and your companion must hear the repeater signal directly. If you’re not in range of the repeater, the ping test will fail with a timeout error.
-</WRAP> 
  
-<pagebreak>+<WRAP pagebreak />
  
  
 +====== Resources ======
  
-====== Maps ====== +===== Online Tools and Maps ===== 
-  * [[https://map.meshcore.dev/?zoom=10&lat=49.5127&lon=-123.5797| Official MeshCore Node map]] +|[[https://app.meshcore.nz]]|The browser version of the MeshCore app| 
-  * [[https://swbc.meshmapper.net/ |Community generated map]] +|[[https://map.meshcore.dev/?zoom=10&lat=49.5127&lon=-123.5797| https://map.meshcore.io]] |Official MeshCore Node map| 
-  * [[https://ridgeline.ve7kod.ca/live |SWBC Map with links]] by VE7KOD+|[[https://swbc.meshmapper.net]] |Community-generated map | 
 +|[[https://ridgeline.ve7kod.ca]] |MeshCore Observatory by VE7KOD| 
 +|[[https://analyzer.letsmesh.net/map?lat=44.46703&long=-99.43156&zoom=2 |https://analyzer.letsmesh.net]] |MeshCore Analyser | 
 +|[[https://heywhatsthat.com/profiler.html |https://heywhatsthat.com]] |Path Profiler |
  
-<hidden Repeater Project> 
-{{  :links:meshcore:meshcore_repeaters.jpg?500  }} 
-Here's how to use MeshCore's Antenna Coverage tool to model line of sight coverage: 
-  * Navigate to the [[https://app.meshcore.nz/ |web version of the MeshCore App]] 
-  * You don't need to connect to an actual MeshCore device. 
-  * Click on <key>**⋮**</key>  on the top right corner and then select ''Tools'' 
-  * Enter the ''Antenna Coverage'' tool 
-  * Where it says ''0 Coverage Layers'' click on <key>**⋮**</key> and select ''Import JSON'' 
-  * Import {{ :links:meshcore:coverage_layers_2026-03-27-221828.json |this file}} 
-</hidden> 
-\\ 
  
-====== Tools ====== +===== More Information ===== 
-  * [[https://analyzer.letsmesh.net/map?lat=44.46703&long=-99.43156&zoom=2 |MeshCore Analyser]] +|[[https://meshcore.io]] |Official MeshCore website| 
-  * [[https://heywhatsthat.com/profiler.html |Path Profiler]]+|[[https://github.com/meshcore-dev/MeshCore]] |Official MeshCore Github| 
 +|[[https://youtu.be/OwmkVkZQTf4]] |Youtube Presentation by Liam Cottle| 
 +|[[https://scottbaker.ca/meshcore]] |Scott Baker's website| 
 +|[[https://ve7lee.tedlee.ca/mesh.html]] |VE7LEE's MeshCore website| 
 +|[[https://salishmesh.net]] |Salish Mesh Website| 
 +|[[https://www.austinmesh.org/learn/meshcore-vs-meshtastic]] |MeshCore vs Meshtastic| 
 +|[[https://idahomesh.org/meshcore-channels-rooms-and-dms]] |Channels vs Rooms vs DMs| 
 +|[[https://discord.gg/vHUqyBSTPe]] |Vancouver Island Amateur Radio Discord Server |
  
-<pagebreak> 
-====== Resources ====== 
  
-  * Official MeshCore [[https://meshcore.io |Website]] and  [[https://github.com/meshcore-dev/MeshCore| Github]] +===== To Do ===== 
-  * [[https://youtu.be/OwmkVkZQTf4 |Youtube Presentation by Liam Cottle]] +<WRAP round todo 30em> 
-  * [[https://scottbaker.ca/meshcore |Scott Baker's Website]] +  * Add screenshots to the [[#channels]] section 
-  * {{:links:meshcore:mc_viard_document.pdf |Vancouver Island Amateur Radio Discord MeshCore tips & Tricks}} <wrap hi>NEW</wrap> +  * Edit the [[part2 |second part]] of this guide. 
-  * [[https://salishmesh.net/ |Salish Mesh Website]] + --- //[[va7fi@rbox.me|Patrick, VA7FI]] 2026/10/25 20:34// 
-  * [[https://forum.letsmesh.net/ |Forum]] +</WRAP> 
-  * [[https://www.austinmesh.org/learn/meshcore-vs-meshtastic/ |MeshCore vs Meshtastic]] +
-  * [[https://idahomesh.org/meshcore-channels-rooms-and-dms/ |Channels vs Rooms vs DMs]]+
  
 +===== Copyright and Attribution =====
 +This document is licensed under [[https://creativecommons.org/licenses/by-sa/4.0/ |CC BY-SA 4.0 International]].  The original can be found at https://scarcs/links/meshcore/home
  
 +A big part of this document used Liam Cottle's [[https://files.liamcottle.net/MeshCore/Documentation/MeshCore_Quick_Start_Guide.pdf |MeshCore Quick Start Guide]] from November 2025 (CC-BY-SA) as a starting point.  We then updated and expanded his guide with regional settings used on the South West Coast of BC.
links/meshcore/part1.1792943184.txt.gz · Last modified: by va7fi